Laser Pointing Error Estimation Based on Energy Data of LOLA System

HAN Yue1 LI Song1 YU Shizhe1 ZHANG Zhiyu1 ZHOU Hui1

(1.Electronic Information School, Wuhan University, Wuhan, Hubei Province, China 430072)

【Abstract】To obtain the lunar elevation with high accuracy, it is necessary to accurately estimate the pointing error of laser. During the on-orbit operation of the Lunar Orbital Laser Altimeter (LOLA), the laser pointing at night deviates from that during the daytime due to the large temperature difference between day and night. This study first establishes a theoretical model of the detector receiving energy when the spot deviates from the center of the receiving field of view. Then, it analyzes the theoretical relationship between the spot offset and relative received energy based on this model and puts forward an estimation method of laser pointing error based on spot energy. Subsequently, the energy data generated when LOLA passed through Aestuum region during the surveying orbit (12 months) is used and combined with the estimation method. Then, the laser pointing errors of LOLA at night in moon are estimated to be 140.62 μrad along the orbit and −413.17 μrad vertical to the orbit, which are consistent with the results derived from LOLA earth scanning experiment and orbital intersection altitude data.

【Keywords】 remote sensing; lunar orbital laser altimeter; on-orbit calibration; laser pointing error; energy data;

【DOI】

【Funds】 National Natural Science Foundation of China (41801261) National Science and Technology Major Project of China (11-Y20A12-9001-17/18, 42-Y20A119001-17/18) Joint Fund of Equipment Pre-research of China Aerospace Science and Technology Corporation (6141B06110102)

Download this article

(Translated by WEI JM)

    References

    [1] Smith D E, Zuber M T, Jackson G B, et al. The Lunar Orbiter Laser Altimeter investigation on the Lunar Reconnaissance Orbiter mission [J]. Space science reviews, 2010, 150: 209–241.

    [2] Vondrak R, Keller J, Chin G, et al. Lunar Reconnaissance Orbiter (LRO): observations for lunar exploration and science [J]. Space science reviews, 2010, 150: 7–22.

    [3] Di K C, Liu B, Liu Z Q, et al. Review and prospect of lunar mapping using remote sensing data [J]. Journal of Remote Sensing, 2016, 20 (5): 1 230–1 242 (in Chinese).

    [4] Mao D D, McGarry J F, Mazarico E, et al. The laser ranging experiment of the Lunar Reconnaissance Orbiter: five years of operations and data analysis [J]. Icarus, 2017, 283: 55–69.

    [5] Smith D E, Zuber M T, Neumann G A, et al. Summary of the results from the Lunar Orbiter Laser Altimeter after seven years in lunar orbit [J]. Icarus, 2017, 283: 70–91.

    [6] Qiao L, Ling Z C, Head J W, et al. Analyses of Lunar Orbiter Laser Altimeter 1, 064-nm albedo in permanently shadowed regions of polar crater flat floors:implications for surface water ice occurrence and future in situ exploration [J]. Earth and Space Science, 2019, 6 (3): 467–488.

    [7] Barker M K, Sun X, Mazarico E, et al. Lunar phase function at 1064 nm from Lunar Orbiter Laser Altimeter passive and active radiometry [J]. Icarus, 2016, 273: 96–113.

    [8] Yi H, Li S, Ma Y, et al. On-orbit calibration of satellite laser altimeters based on footprint detection [J]. Acta Physica Sinica, 2017, 66 (13): 134206 (in Chinese).

    [9] Rowlands D D, Pavlis D E, Lemoine F G, et al. The use of laser altimetry in the orbit and attitude determination of Mars Global Surveyor [J]. Geophysical Research Letters, 1999, 26 (9): 1 191–1 194.

    [10] Mazarico E, Barker M K, Neumann G A, et al. Detection of the lunar body tide by the Lunar Orbiter Laser Altimeter [J]. Geophysical Research Letters, 2014, 41 (7): 2 282–2 288.

    [11] Barker M K, Sun X, Mao D, et al. In-flight characterization of the Lunar Orbiter Laser Altimeter instrument pointing and far-field pattern [J]. Applied Optics, 2018, 57 (27): 7 702–7 713.

    [12] Ramos-Izquierdo L, Scott V S, Connelly J, et al. Optical system design and integration of the Lunar Orbiter Laser Altimeter [J]. Applied Optics, 2009, 48 (16): 3 035–3 049.

    [13] Kim S, Lee I, Kwon Y. Simulation of a Geiger-mode imaging LADAR system for performance assessment [J]. Sensors, 2013, 13 (7): 8 461–8 489.

    [14] National aeronautics and space administration. Lunar orbital data set [DB/OL]. (2019-08-16)[2019-09-05]. https://ode.rsl.wustl.edu/moon/index Product Search.aspx.

    [15] Neumann G A, Smith D E, Scott S R, et al. Lunar Reconnaissance Orbiter Lunar Orbiter Laser Altimeter reduced data record and derived products software interface specification, version 2. 42 [Z]. USA: NASA, 2011.

    [16] Keller J W, Petro N E, Vondrak R R. The Lunar Reconnaissance Orbiter mission-six years of science and exploration at the moon [J]. Icarus, 2016, 273: 2–24.

    [17] Mazarico E, Neumann G A, Barker M K, et al. Orbit determination of the lunar reconnaissance orbiter:status after seven years [J]. Planetary and Space Science, 2018, 162: 2–19.

    [18] National aeronautics and space administration. RADR data set description[DB/OL]. (2019-08-16)[2019-09-05]. http://pds-geosciences.wustl.edu/lro/lro-l-lola-3-rdr-v1/lrolol_1xxx/catalog/radr_ds.cat.

This Article

ISSN:0253-2239

CN:31-1252/O4

Vol 40, No. 05, Pages 188-196

March 2020

Downloads:4

Share
Article Outline

Abstract

  • 1 Introduction
  • 2 Theoretical analysis
  • 3 Introduction to experimental area and data
  • 4 Estimation of laser pointing error
  • 5 Conclusion
  • References